Welcome to Mightywide's™ Wholesale Website
for the Billboarder Banner Framing System™
and Wide-Format Printing

Wholesale Only
Not Yet a Dealer? Please Read Below

We are Exclusive Wholesale-Only World Wide Distributors for the Billboarder Banner Framing System (U.S. Patent #8,096,070) and Wide-Format Printers for those of our Dealers who need our 10.5‑foot Wide‑Format Printing Service.

Call us and Say Hi! It costs nothing to register! (619) 644‑2332

To see our wholesale-only Wide-Format Banner prices, click here!

The BILLBOARDER BANNER FRAMING SYSTEM
turns any BOX TRUCK, TRAILER OR WALL
into a BILLBOARD


To receive a FREE Demonstration Sample You Must Call! You only Pay the Shipping.
Refundable on First order. Click here to see it.



Above is our truck.
Below is an ad you can run on your Website or Email to your Customer Base.
Lots of companies have Box Trucks and Tractor Trailers, and
they all have Interior and Exterior Walls!


Below are just a very few of the companies that have installed "The BILLBOARDER BANNER FRAMING SYSTEM" on their Trucks and Walls



Many more pictures below, but first let's take a look at how the Billboarder Banner Framing System works to TIGHTEN and HOLD BANNERS SECURELY at HIGHWAY SPEEDS. Its sleek design is only 3/8" off the wall for minimal wind resistance and minimal increase in the truck's width, as well as looking elegant on an Office Wall or the Exterior of a Building or on Trucks!

 

The Billboarder Banner Framing System

Comes in 8-foot lengths; Each length is two pieces (base plate and capping plate).

Wholesale pricing:

 
1-4$48.00 each
5-8$44.00 each
9-12$40.00 each
13-24$36.00 each
25 or more$34.00 each

Here is a short overview of how the Billboarder Banner Framing System works. Click the red button above for a more detailed EZ-to-follow photo installation guide.

It's simple. The patented Billboarder Banner Framing System™ comes in 8-foot lengths. Each 8-foot length comes in two pieces: the base plate and the capping plate. Self-tapping screws and rubber compression gaskets are also included. Using the long screws provided, you attach the base plate to the truck or interior or exterior wall. You insert the rubber compression gaskets into the gasket trap over each screw head location. Note: you only need to attach the base plate to the wall or truck and insert the gaskets during the initial installation, not every time you change out the banner. No need to pre-cut the banner to the correct size - you precision-cut the banner right on the frame using our Patented Cutting Groove. You can't miss trimming the banner to the correct size. You temporarily tape the banner to the base plate with super-easy-to-remove duct tape. You hook the anodized capping plate onto the outside edge of the base plate, and attach the cap to the base plate using the short screws provided. The Patented rubber compression gaskets compress the banner against the capping plate and hold the Banner securely. The short screws bring the inside edge of the capping plate completely down to the wall, tightening the banner, so flat it looks like it's painted on!
You're done with your initial installation!

Changing banners is easy, and is a major feature of the Billboarder Banner Framing System. Just remove the capping plate, undo the duct tape by pulling the banner off, roll up the old banner for future reuse, and repeat the process above (skipping the base plate installation, and starting with taping the banner to the base plate) to install your new banner!

More picures from all over the USA that Billboarder customers have sent in from as far West as Hawaii...


And as far East as Connecticut!


BILLBOARDER BANNER FRAMING SYSTEM VS other FRAMING SYSTEMS
Much SLIMMER PROFILE than other FRAMING SYSTEMS
Its sleek design is only 3/8ths of an inch off the wall for minimal wind resistance and minimal increase in the truck's width, as well as looking elegant on an office wall or the exterior of a Building, as well as Trucks.

Much SLIMMER PRICE than other FRAMING SYSTEMS
About one third the cost of other framing systems.
See our wholesale-only pricing above.

Much LESS MEASURING - IN FACT, NO MEASURING
Our patented automatic cutting groove makes cutting the banner to the right size "goof-proof."
No other framing system has this patented, very important innovation!

Much FASTER INSTALLATION and CHANGE-OUTS than other FRAMING SYSTEMS
No army of nuts to tighten CALL FOR DETAILS (619)644-2332

BILLBOARDER BANNER FRAMING SYSTEM VS. GLUE-ON GRAPHICS
Much LESS COST AND TIME TO INSTALL than GLUE-ON GRAPHICS
THE BILLBOARDER BANNER FRAMING SYSTEM... can be installed by any Handyman. No Professional installer Needed No Special Tools required!
Installation time? About 1 to 2 hours per side First Time ONLY, Less than half that time For just banner change-outs after "first time" initilal Base Plate Installation
With GLUE-ON GRAPHIC TRUCK ADS, a Professional Expensive Installer and Special Tools are Needed and he gets a lot more an hour than a Handyman. A Glue-On Graphics installation can take days and requires specialized tools and specific skills for installing GLUE-ON GRAPHIC TRUCK ADS.

Much LESS COST TO CHANGE-OUT ADS than GLUE-ON GRAPHICS
With the BILLBOARDER BANNER FRAMING SYSTEM you use inexpensive BANNERS. Depending on size aproximately 2 to 4 hundred dollars cost for the banner and a handyman for a couple of hours Vs.with GLUE-ON GRAPHIC TRUCK ADS, You basically have the same Expensive Glue-On Process to do all over again of tediously removing the old glued-on graphics and profesionaly instaling the new graphics pannel by panel. So another Big cost once again $2,400.00 to $4,000. This High cost to change out ads with Glue-On Graphics of course can inhibit one's decision to change out their Truck Ads, even when a change is overdue!

Much EASIER TO REMOVE ADS than GLUE-ON GRAPHICS
With the BILLBOARDER BANNER FRAMING SYSTEM, Just unscrew the capping plates, pull the BANNER off, You're Done! With GLUE-ON GRAPHIC TRUCK ADS, When it's time to change the ad, you are left with a gluey mess to scrape off piece by piece "too much like removing wallpaper" it takes hours upon hours to totally remove a Glue-On Graphic.

An Installed BILLBOARDER BANNER FRAMING SYSTEM Increases the truck's value!
Glue-On Graphics DECREASE the truck's value.

The BILLBOARDER BANNER FRAMING SYSTEM IS SIMPLY FAR BETTER than Glue-On Graphics or any other Frames
Low 3/8 inch Profile, Lower Cost, EZ Installation and Change-outs,
Simple patented design now on trucks all over the USA!
Low cost even makes the decision to change your ads Easy!

Get this Demonstrator Sample
FREE!


Become a Billboarder Banner Framing System Dealer and this Demonstrator Sample is yours FREE! Just pay the shipping ($15-25, most anywhere in the Continental USA), which will be refunded as a credit on your first order!
Call us at
(619) 644-2332
and request one!

Dealers who have this sample sell more Billboarder Banner Framing Systems, and therefore sell more BANNERS and BANNER REORDERS!
If you're a dealer without this sample,
Call Us
at (619) 644-2332
and request one.






Wholesale-Only Wide-format BANNER PRINTING
priced as low as 70¢ per square foot!


We provide our banner printing service for those of our sign company dealers who may have had their printer go down temporarily, or cannot print this large as the job calls for.
Okay, we admit it - some banner companies make banners just as well as we do. Most do not...
But no one makes them for less!
Our quality is Top Notch! Full Photographic Color, printed with solvent fade-resistant ink on heavy-duty all-weather 13-ounce Banner Material with embedded reinforcing threading -- THE BEST!

Yet our prices are only about 25% of what some national chain stores charge for Banners, and far less than what most other sign shops charge, so you'll have a nice profit margin every time you resell to your customer!

Example: A 2 x 3 foot banner (6 square feet) @ $1.45 per square foot; your price is only $8.70. Add hemming and grommetting for only $0.50 per linear foot (10 feet for this banner, $5 your cost), and you have a fully-finished banner for only $13.70 total banner price! This banner sells elsewhere for around $50! If you need artwork, it's only $29* (almost all cases).

To figure your price:
  1. Figure the square footage (length x width in feet, rounded up to a full foot).
    Example: a 4.5 foot x 7.25 foot banner is calculated at 5 x 8 = 40 square feet.
  2. Check the table below to find the per-square-foot price for your banner:
    1 to 99 square feet$1.45 per square foot
    100 to 499 square feet$1.25 per square foot
    500 to 999 square feet$1.00 per square foot
    1000 square feet and up   $0.70 per square foot
  3. Add $0.50 per linear foot (height x 2 + width x 2) for full thermal hemming and brass grommetting.

Please call us for more information or quotations on the Billboarder Banner Framing System,
wholesale-only wide-format printing, magnetic signs, decals, contour cutting,
or on-and-off Wall-Eeze™ removable wall decals!
(619) 644-2332